MTPADP-RS
Keypad and RFID reader
This double technology reader, in ABS, offers a double access security: via code and card. It can be installed either outside or inside. It comes with an RS-485 bus and a backlight keypad. Its LEDs, tamper and buzzer are managed directly by the WS4 controllers. It can read EM, HID 125 kHz or 13,56 MHz cards, depending on the programming selected or the model.
Features Specifications Support Related products
XPR / Solutions / Web Access / Keypads / MTPADP-RS
Features
RS-485 Output
It works with an RS-485 output, establishing bidirectional communication between the reader and the WS4 controllers reducing the number of wires needed in the installation.
RFID Reader
The MTPADP-RS-MF reads Mifare Classic, Ultralight and Desfire cards.
The MTPADP-RS-EH reads EM4002/4100 and HID 125 kHz compatible cards.
Tamper Switch
Managed by the host – It sends a signal to the alarm when the keypad is opened and/or dismantled by force.
Mullion Keypad
The MTPADP-RS with its slim housing is suitable for doorframe mounting.
Backlit Keypad
The MTPADP-RS is equipped with an orange backlight that can be easily disabled if necessary with My WS4.
The keypad changes its backlight color when the code or card is presented: from orange to red if the access is denied or from orange to green if the access is authorized. The orange LED indicates that the reader is connected (idle mode).
Specifications
| Mounting: | Surface |
|---|---|
| Housing: | ABS |
| Colours: | Black / Silver |
| Resin potted electronic: | Yes |
| Keys: | Backlit metallic |
| Output: | RS-485 |
| Visible signals: | Managed by the host: – Green LED: access granted – Red LED: access denied |
| Audible signal: | 1 internal buzzer – managed by the host |
| Read range: | up to 5 cm |
| Push buttons: | 1 |
| Wiring: | 50 cm cable |
| Tamper protection: | Yes – managed by the host |
| Voltage: | 9-14 V DC |
| Consumption: | 30 mA stand-by 100 mA maximum |
| IP rating: | IP65 |
|---|---|
| Dimensions (L x H x W): | 51 x 92 x 27 mm |
| Weight: | ~110 g |
| Operating Temperature: | -20°C to 50°C |
| Operating Humidity: | 5% to 95% RH without condensation |
| MTPADP-RS-EH | MTPADP-RS-MF | |
|---|---|---|
| Technology: | Keypad and RFID (EM & HID 125 kHz) | Keypad and Mifare RFID (13.56 MHz) |
| Reading type: | EM or HID cards | Mifare Classic, Desfire and Ultralight cards |
| MTPADPBK-RS-EH V2: | Keypad with RFID (EH) – ABS – Black |
|---|---|
| MTPADPS-RS-EH V2: | Keypad with RFID (EH) – ABS – Silver |
| MTPADPBK-RS-MF V2: | Keypad with RFID (Mifare) – ABS – Black |
| MTPADPS-RS-MF V2: | Keypad with RFID (Mifare) – ABS – Silver |
All product specifications are subject to change without notice.
Support
Related products
