Features
Xsecure Solution
The Xsecure solution is based on the concept of writing the identifier as data on pre-coded MIFARE® DESFire® EV3 13.56 MHz cards.
Xsecure enables each card access key to be distinct and unique, produced through an irreversible diversification process. As a result, the data on the card is encrypted and sealed again, with an error checking against spoofing.
Only the reader and the production card encoding system are aware of this operation.
XPR encodes the cards and validates the identifiers issued to avoid duplication.
Mifare
XS-MF-RS reads Mifare Classic, Ultralight and DESFire credentials with a read range of up to 6 cm.
Large LED surrounding the sensor for quick status readout
The state of the reader is displayed by the rectangular LED in tricolour.
When the card or key fob is presented, the reader changes the colour of the LED: it goes from orange to green if the access is authorised, or from orange to red if it is denied.
The reader is connected when the orange LED turns on (idle mode).
Connectivity
A: Micro USB connector for configuration management and firmware updates in order to ensure optimal performance and functionality.
B: Wire terminals with distinct functions: Power, RS-485
Specification Tables
| Mounting: | Surface mount |
|---|---|
| Housing: | Polycarbonate copolymer (UL94) |
| Internal buzzer: | With adjustable intensity using software |
| Reading range: | Up to 6 cm, depending on the tag type and size |
| Operating frequency: | 13.56 MHz |
| Tamper protection: | When opened or dismantled |
| Wiring: | Terminal block |
| Operating voltage: | 9 – 15 V DC |
| Current Consumption: | Up to 170 mA |
| Dimensions: | 51 x 92 x 27 mm |
| Weight: | 0.15 kg |
| Environmental rating: | Indoor/Outdoor IP 65 (resin potted) |
|---|---|
| Operating temperature: | -30°C to +65°C |
| Operating humidity: | 5% to 95% RH (non-condensing) |
| XS-MF-RS | Mifare |
|---|
All product specifications are subject to change without notice.
