DINMTPX
Flush Mount Mifare or EH Reader
DINMTPX is a RFID reader that combines technology with style.
It will look great on your wall, as its design matches perfectly with practically any decor. Its performance will satisfy your demands too. Easy to mount and use, it comes with a practical rectangular LED that indicates the status of the reader.
Features Specifications Support Related products
XPR / Solutions / ONLine Access / RFID Readers / DINMTPX
Features
Network System
The DINMTPX is a multi-protocol reader that needs to be connected to a Host.
DINMTPX-MF: Wiegand 24, 26, 32, 34, 35, 37, 40, 42, 56 bits
DINMTPX-EH: Wiegand 24, 26, 32, 34, 35, 37, 40, 42 bits
Large LED around the reader for an easy and stylish reading status
DINMTPX has a multicolor rectangular status LED.
The RFID reader changes colour if the user’s key fob is idle (orange), accepted (green) or denied (red).
RFID Reader
The DINMTPX-MF reads Mifare Classic, Ultralight and Desfire cards with a read range of up to 6 cm.
The DINMTPX-EH reads EM4002/4100 and HID 125 kHz compatible cards with a read range of up to 7 cm.
Easy Mounting
It cannot be easier to complete any flush mount. Each piece matches perfectly with the next, and they can be installed in any standard electrical gang box. (The mask and the electronics are sold separately.) The mask is available in UK and European standards.
Plug & Play System
Double and single technology available in different versions, standalone or network, combining biometry, keypad and RFID.
Available in different colours
The DIN Range is available in 3 colours by default: silver, charcoal and white. Three colours that usually go very well with any decor or building design.
And for those who want something different, there are more colours available upon request, like green, blue, red, gold… You will definitely have many options to choose from.
Specifications
| Mounting: | Flush mount |
|---|---|
| Mask: | ABS (sold separately) |
| Colours: | Silver, charcoal, white |
| Visible signal: | Green LED: Access granted – Externally Controlled Red LED: Access denied – Externally Controlled Orange LED: Idle mode |
| Audible signal: | Programmable buzzer (ON/OFF) |
| Tamper protection: | When opened or dismantled |
| Voltage: | 9-14 V DC |
| Outdoor use: | No |
|---|---|
| Dimensions (L x H x W): | 80 x 80 x 9 mm |
| Weight: | ~50 g |
| Operating temperature: | -20°C to +50°C non condensing |
| Operating humidity: | 5% to 95% RH without condensation |
| DINMTPX-MF | DINMTPX-EH | |
|---|---|---|
| Reading type: | Mifare Classic, Ultralight and Desfire | EM4002/4100 compatible & HID (125 kHz) compatible |
| Read range: | Up to 6 cm | Up to 7 cm |
| Operating frequency: | 13.56 MHz | 125 kHz |
| Consumption: | Max. 150 mA | Max. 45 mA |
| Protocol: | Wiegand 24, 26, 32, 34, 35, 37, 40, 42, 56 bits | Wiegand 24, 26, 32, 34, 35, 37, 40, 42 bits |
| DINMTPX-MF-E: | DIN range – electronic only – MIFARE RFID reader – Multi-Wiegand |
|---|---|
| DINMTPX-EH-E: | DIN range – electronic only – EM & HID 125 kHz RFID reader – Multi-Wiegand |
| DINFP: | ABS single frame for all DIN readers & devices – EU standard |
| DINFP-UK: | ABS single frame for all DIN readers & devices – UK standard |
| DINFP2H: | ABS double frame for all DIN readers & devices – Horizontal |
| DINFP2V: | ABS double frame for all DIN readers & devices – Vertical |
All product specifications are subject to change without notice.
Support
Related products
