MTPX-MF-SA
The Offline Surface Mount Access Reader Solution
The MTPX-MF-SA can be programmed with a built-in micro-USB function or desktop card enrolment, depending on the version. Events can be downloaded onto master Mifare cards which also could be used to activate and program additional readers on site.
Features Specifications Support Related products
XPR / Solutions / OFFLine Access / RFID readers / MTPX-MF-SA
Features
Large LED around the sensor for an easy reading of the statust
MTPX-MF-SA has a multi-colour rectangular status LED. The RFID reader changes colour if the user’s key fob is idle (orange), accepted (green) or denied (red).
Available in different colours
There are two colours available by default: silver and black.
There are more colours available upon request, like white, charcoal, green, blue, red… to ensure these units will complement any décor or building design.
Mifare RFID reader
The MTPX-MF-SA is a Mifare read/write reader. It can support Mifare Classic 1K and 4K memory.
The credit on-card option is also available with this reader with software configuration.
Easy configuration
The MTPX-MF-SA can be configured via USB connection or card configuration. There is a Micro USB connector on the back of the reader for easy programming through PC.
With the cards, you only need to program them from the software and afterwards you can easily make the reader initialisation, configuration and event collecting.
Specifications
| Mounting: | Surface |
|---|---|
| Housing: | ABS |
| Colours: | Silver and black |
| Technology: | RFID |
| Cards supported: | Mifare classic 1K, 4K |
| Events memory: | 3500 events |
| Reader mode: | – |
| Blacklist capacity: | 500 |
| Data connectivity: | USB micro connector |
| Schedule activation: | 4 definable actions of lock/unlock based on the time and day of the week |
| Configuration: | By software with USB connection or programming cards created using software and USB desktop reader |
| Users capacity: | Unlimited |
| Read range: | Up to 6 cm |
| Programming: | Micro USB or Cards |
| Output: | 1 built-in relay (2 A; 24 V AC/DC) RS-485 for remote relay unit RU2, DINRTT, RTT |
| Relay time: | Trigger 1-255 s or toggle |
| Visible signal: | Green LED: Access granted Red LED: Access denied Orange LED: Idle mode |
| Audible signal: | Internal buzzer |
| Exit button input: | Yes |
| Tamper protection: | Yes |
| Voltage: | 12 V DC |
| Consumption: | Maximum 150 mA |
| IP rating: | IP65 |
|---|---|
| Dimensions (L x H x W): | 51 x 92 x 25 mm |
| Weight: | ~0.15 kg |
| Operating Temperature: | -20°C to 50°C |
| Operating Humidity: | 5% to 95% RH (non-condensing) |
| MTPXS-MF-SA: | ABS – Silver |
|---|---|
| MTPXBK-MF-SA: | ABS – Black Edition |
All product specifications are subject to change without notice.
Support
Related products
