XPM
RFID Mullion Reader
The Mullion reader integrates effectively with our PROS CS client server software and EWS controllers, supporting 125 kHz and/or 13.56 MHz credentials and communicating via standard Wiegand protocol.
The configuration and the firmware update can be done using our PROS CS software via the USB-C input on the back of the reader or with a programming card.
The XP products are coming with the Xsecure® key programmable with the Product Manager software.
Features Specifications Support Related products
XPR / Solutions / ONLine Access / RFID Readers / XPM
Features
Xsecure Solution
The Xsecure solution is based on the concept of writing the identifier as data on pre-coded MIFARE® DESFire® EV3 13.56 MHz cards.
Xsecure enables each card access key to be distinct and unique, produced through an irreversible diversification process. As a result, the data on the card is encrypted and sealed again, with an error checking against spoofing.
Only the reader and the production card encoding system are aware of this operation.
XPR encodes the cards and validates the identifiers issued to avoid duplication.
Front tricolour LED
The state of the reader is displayed by a front triolour LED. When the card or key fob is presented, the LED transitions from blue to green if the access is granted, or from blue to red if it is denied. A prominent blue LED illuminates when the reader is connected and ready to receive credentials (idle mode).
Mullion reader
The XPM features a slim and narrow design, making it ideal for door frames or mullions with limited space.
Mullion readers are a practical solution for access control in areas with limited mounting space, providing security and convenience without compromising the design aesthetics of the entryway.
Mifare and EH/Mifare
The XPM-MF and XPM-MFBT read Mifare CSN, DESFire and Xsecure credentials with a read range of up to 9 cm.
The XPM-EHMF and XPM-EHMFBT 125 KHz EM/HID (EM 4100/HID Prox), read Mifare CSN, DESFire and Xsecure credentials with a read range of up to 9 cm.
Plug and Play
The Xpro readers’ Plug and Play system simplifies installation and offers secure and flexible access management options. The readers are pre-configured and ready to connect with the solution of your choice. This saves both time and resources when implementing the access control system.
Connectivity
A: USB-C connector for configuration management and firmware updates in order to ensure optimal performance and functionality.
B: Wire terminals with distinct functions: Power, RS-485, Wiegand D0, D1, LED, Buzzer control, Tamper
Specifications
| Mounting: | Surface mount |
|---|---|
| Housing: | Polycarbonate copolymer (UL94) |
| Internal buzzer: | With adjustable intensity using software |
| Communication: | Wiegand |
| Reading range: | Up to 9 cm, depending on the tag type and size |
| Operating frequency: | 13.56 MHz |
| Tamper protection: | Up to 9 cm, depending on the tag type and size |
| Wiring: | Terminal block |
| Operating voltage: | 9 – 15 V DC |
| Max. consumption at 12 V DC: | 100 mA |
| Supported credentials: | Xsecure®, Mifare CSN (Classic, DESfire, Plus, Ultralight), Mifare DESfire (EV1, EV2, EV3) |
| Dimensions: | 113 x 42 x 27 mm |
| Weight: | ~0.10 kg |
| Environmental rating: | Indoor/Outdoor IP 65 (resin potted) |
|---|---|
| Operating temperature: | -30°C to +70°C |
| Operataing humidity: | 0% to 95% RH (non-condensing) |
| Impact protection rating: | IK11 |
| XPM-MF | Mifare – without BLE module |
|---|---|
| XPM-MFBT | Mifare – with BLE module |
| XPM-EHMF | Mifare – EH – without BLE module |
| XPM-EHMFBT | Mifare – EH – with BLE module |
All product specifications are subject to change without notice.
Support
Related products
